View STGD10NC60SD_1605419.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

july 2009 doc id 15847 rev 1 1/12 12 STGD10NC60SD stgf10nc60sd 10 a - 600 v fast igbt features very low on-voltage drop (v ce(sat) ) very soft ultra fast antiparallel diode minimum power losses at 5 khz in hard switching optimized performance for medium operating frequencies application medium frequency motor control description this igbt utilizes the advanced powermesh? process resulting in an excellent trade-off between switching performance and low on-state behavior. figure 1. internal schematic diagram dpak to-220fp 1 2 3 1 3 table 1. device summary order codes marking package packaging STGD10NC60SDt4 gd10nc60sd dpak tape and reel stgf10nc60sd gf10nc60sd to-220fp tube www.st.com
contents STGD10NC60SD, stgf10nc60sd 2/12 doc id 15847 rev 1 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
STGD10NC60SD, stgf10nc60sd electrical ratings doc id 15847 rev 1 3/12 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit dpak to-220fp v ces collector-emitter voltage (v ge = 0) 600 v i c (1) 1. calculated according to the iterative formula: collector current (continuous) at t c = 25c 18 10 a i c (1) collector current (continuous) at t c = 100c 10 5 a i cl (2) 2. v clamp = 80%,(v ces ), t j =150 c, r g = 10 , v ge = 15 v turn-off latching current 14 a i cp (3) 3. pulse width limited by maximum permissible j unction temperature and turn-off within rbsoa pulsed collector current 25 a i f diode rms forward current at t c =25 c 10 a i fsm surge non repetitive forward current t p = 10 ms sinusoidal 20 a v ge gate-emitter voltage 20 v p tot total dissipation at t c = 25 c 60 25 w t j operating junction temperature -55 to 150 c table 3. thermal data symbol parameter value unit dpak to-220fp r thj-case thermal resistance junction-case igbt 2.08 5 c/w thermal resistance junction-case diode 4.5 c/w r thj-amb thermal resistance junction-ambient 100 62.5 c/w i c t c () t jmax () t c ? r thj c ? v ce sat () max () t jmax () i c t c () , () ------------------------------------------------------------------------------------------------------- =
electrical characteristics STGD10NC60SD, stgf10nc60sd 4/12 doc id 15847 rev 1 2 electrical characteristics (t j =25c unless otherwise specified) table 4. static symbol parameter test conditions min. typ. max. unit v (br)ces collector-emitter breakdown voltage (v ge = 0) i c = 1 ma 600 v v ce(sat) collector-emitter saturation voltage v ge = 15 v, i c = 5 a v ge = 15 v, i c = 5 a, t j = 125 c 1.45 1.3 1.65 v v v ge(th) gate threshold voltage v ce = v ge , i c = 250 a 3.75 5.75 v i ces collector cut-off current (v ge =0) v ce = 600 v v ce =600 v, t j =125 c 150 1 a ma i ges gate-emitter leakage (v ce =0) v ge = 20 v 100 na g fs forward transconductance v ce = 15 v , i c = 5 a 3.5 s table 5. dynamic symbol parameter test conditions min. typ. max. unit c ies c oes c res input capacitance output capacitance reverse transfer capacitance v ce = 25 v, f = 1 mhz, v ge = 0 - 365 44 8 - pf pf pf q g q ge q gc total gate charge gate-emitter charge gate-collector charge v ce = 390 v, i c = 5 a, v ge = 15 v figure 3 - 17 3 7 - nc nc nc
STGD10NC60SD, stgf10nc60sd electrical characteristics doc id 15847 rev 1 5/12 table 6. switching on/off (inductive load) symbol parameter test cond itions min. typ. max. unit t d(on) t r (di/dt) on turn-on delay time current rise time turn-on current slope v cc = 390 v, i c = 5 a r g = 10 , v ge = 15 v, figure 4 - 19 4 1330 - ns ns a/s t d(on) t r (di/dt) on turn-on delay time current rise time turn-on current slope v cc = 390 v, i c = 5 a r g = 10 , v ge = 15 v, t j = 125c figure 4 - 18 4.5 1000 - ns ns a/s t r (v off ) t d ( off ) t f off voltage rise time turn-off delay time current fall time v cc = 390 v, i c = 5 a, r g = 10 , v ge = 15 v, figure 4 - 100 160 205 - ns ns ns t r (v off ) t d ( off ) t f off voltage rise time turn-off delay time current fall time v cc = 390 v, i c = 5 a, r g = 10 , v ge = 15 v, t j = 125c figure 4 - 165 250 310 - ns ns ns table 7. switching energy (inductive load) symbol parameter test co nditions min typ. max unit e on (1) e off (2) e ts 1. eon is the turn-on losses when a typical diode is used in the test circuit in figure 2 . if the igbt is offered in a package with a co-pack diode, the co-pack diode is used as external diode. igbts and diode are at the same temperature 2. turn-off losses included also include also the tail of the collector current turn-on switching losses turn-off switching losses total switching losses v cc = 390 v, i c = 5 a r g = 10 , v ge = 15 v, figure 2 - 50 290 340 - j j j eon (1) e off (2) e ts turn-on switching losses turn-off switching losses total switching losses v cc = 390 v, i c = 5 a r g = 10 , v ge = 15 v, t j = 125c figure 2 - 73 485 558 - j j j table 8. collector-emitter diode symbol parameter test conditions min typ. max. unit v f forward on-voltage i f =5 a i f =5 a, t j =125 c - 2 1.6 - v v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i f =5 a, v r =40 v, di/dt=100 a/s figure 5 - 22 14 1.3 - ns nc a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i f =5 a, v r =40 v, t j =125 c, di/dt=100 a/s ( figure 5 - 35 40 2.2 - ns nc a
test circuits STGD10NC60SD, stgf10nc60sd 6/12 doc id 15847 rev 1 3 test circuits figure 2. test circuit for inductive load switching figure 3. gate charge test circuit figure 4. switching waveforms figure 5. diode recovery time waveform
STGD10NC60SD, stgf10nc60sd package mechanical data doc id 15847 rev 1 7/12 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack? packages, depending on their level of environmental compliance. ecopack? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark.
package mechanical data STGD10NC60SD, stgf10nc60sd 8/12 doc id 15847 rev 1 dim. mm. min. typ max. a 2.20 2.40 a1 0. 9 01.10 a2 0.0 3 0.2 3 b 0.64 0. 9 0 b 4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 d 6.00 6.20 d1 5.10 e 6.40 6.60 e1 4.70 e2.2 8 e1 4.40 4.60 h 9 . 3 5 10.10 l1 l1 2. 8 0 l2 0. 8 0 l4 0.60 1 r0.20 v2 0 o 8 o to-252 (dpak) mechanical data 006 8 772_g
STGD10NC60SD, stgf10nc60sd package mechanical data doc id 15847 rev 1 9/12 dim. mm . x a m . p y t . n i m 6 . 4 4 . 4 a 7 . 2 5 . 2 b 5 7 . 2 5 . 2 d 7 . 0 5 4 . 0 e 1 5 7 . 0 f 0 7 . 1 5 1 . 1 1 f 5 . 1 5 1 . 1 2 f 2 . 5 5 9 . 4 g 7 . 2 4 . 2 1 g 4 . 0 1 0 1 h 6 1 2 l 6 . 0 3 6 . 8 2 3 l 6 . 0 1 8 . 9 4 l 6 . 3 9 . 2 5 l 4 . 6 1 9 . 5 1 6 l 3 . 9 9 7 l 2 . 3 3 a i d 7012510_rev_j a b h di a l7 d e l6 l5 l2 l 3 l4 f1 f2 f g g1 to-220fp mechanical data
packaging mechanical data STGD10NC60SD, stgf10nc60sd 10/12 doc id 15847 rev 1 5 packaging mechanical data tape and reel shipment dpak footprint dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0.795 g 16.4 18.4 0.645 0.724 n 50 1.968 t 22.4 0.881 base qty bulk qty 2500 2500 reel mechanical data dim. mm inch min. max. min. max. a0 6.8 7 0.267 0.275 b0 10.4 10.6 0.409 0.417 b1 12.1 0.476 d 1.5 1.6 0.059 0.063 d1 1.5 0.059 e 1.65 1.85 0.065 0.073 f 7.4 7.6 0.291 0.299 k0 2.55 2.75 0.100 0.108 p0 3.9 4.1 0.153 0.161 p1 7.9 8.1 0.311 0.319 p2 1.9 2.1 0.075 0.082 r 40 1.574 w 15.7 16.3 0.618 0.641 tape mechanical data all dimensions are in millimeters
STGD10NC60SD, stgf10nc60sd revision history doc id 15847 rev 1 11/12 6 revision history table 9. document revision history date revision changes 06-jul-2009 1 initial release
STGD10NC60SD, stgf10nc60sd 12/12 doc id 15847 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2009 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STGD10NC60SD

	To Download STGD10NC60SD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .